HP SitePrint
Autonomous wheeled robot that prints CAD (.dxf) layout lines/points on floor slabs, guided by a third-party robotic total station
Models: Value Pack 3.0, Robot Upgrade Kit 3.0
Price on request
At a glance
Specifications
| Battery | 2 batteries x up to 4 h continuous |
|---|---|
| Navigation | Smart Navigation; 'shadowing' to keep total-station line of sight |
| Accuracy | Layout accuracy up to ±2 mm (3/32 in) at 5-30 m with 1" total station, SMR prism, High Accuracy mode; floor deviation marking ±0.8 mm |
| Sensors | Depth-camera obstacle detection |
| Compatibility | Total stations: Leica TS16/TS60/iCON iCR80/iCR70, Topcon LN-150/GT-600/GT-1200, Trimble RTS 573/S9 |
| Other | Works on rough surfaces; inks fast/medium/slow fading |
What it does
Floor layout printing, floor deviation marking
Where it works
Documents
About the maker
- Company
- HP SitePrint
- Based in
- Palo Alto, CA, United States
- Status
- Active
- Sold in
- Not found on the maker's site
- Rental or as a service
- Yes
Facts from the maker’s own website (hp.com), last checked 2026-10-30.
Similar robots from other makers
Gravis RACK
Retrofit autonomy kit making excavators and wheel loaders autonomous: terrain-aware digging, truck loading, 3D…
CivDot Mini
Compact robot for straight/curved line markings on paved surfaces (roads, parking lots)
$40,000
CivDot+
Rugged 4WD autonomous GNSS rover that marks survey/stake-out points with a paint-spraying arm on large outdoor…
FieldPrinter 2
Mobile robot that prints full-scale BIM/CAD layout (lines, text, QR codes) directly onto concrete slabs, guided…
Jaibot
Semi-autonomous, BIM-enabled mobile robot that marks and drills holes in concrete/metal-deck ceilings and walls…
Lionel
Autonomous floor-marking robot that prints CAD layouts on floors (exhibitions, data centres, factory fit-outs…
Buyer’s guide: layout robots for construction
How they work
The robot reads the CAD or BIM drawing and is positioned by a total station or its own sensors, then prints lines and text at millimetre accuracy.
What to check before buying
- Accuracy and area per hour
- CAD/BIM formats supported
- Whether a total station is needed