Lionel
Autonomous floor-marking robot that prints CAD layouts on floors (exhibitions, data centres, factory fit-outs, warehouses).
Price on request
At a glance
Specifications
| Work rate | 90 marks/hour |
|---|---|
| Accuracy | Within 1/8"; 10x more accurate than hand-marking |
| Other | <30 min set-up on each job |
What it does
Where it works
About the maker
- Company
- August Robotics
- Based in
- Las Vegas, NV, United States
- Status
- Active
- Sold in
- Not found on the maker's site
- Rental or as a service
- Not found
Facts from the maker’s own website (construction.augustrobotics.com), last checked 2026-11-02.
More from August Robotics
Similar robots from other makers
FieldPrinter 2
Mobile robot that prints full-scale BIM/CAD layout (lines, text, QR codes) directly onto concrete slabs, guided…
Gravis RACK
Retrofit autonomy kit making excavators and wheel loaders autonomous: terrain-aware digging, truck loading, 3D…
Jaibot
Semi-autonomous, BIM-enabled mobile robot that marks and drills holes in concrete/metal-deck ceilings and walls…
Elios 3
Collision-tolerant caged drone for visual inspection, LiDAR surveying and UT/radiation measurement in confined…
HP SitePrint
Autonomous wheeled robot that prints CAD (.dxf) layout lines/points on floor slabs, guided by a third-party…
Raise multipurpose slab-edge robot
Mobile base with two UR20 cobot arms that drills, aligns and torques facade/curtain-wall brackets and fasteners…
Buyer’s guide: layout robots for construction
How they work
The robot reads the CAD or BIM drawing and is positioned by a total station or its own sensors, then prints lines and text at millimetre accuracy.
What to check before buying
- Accuracy and area per hour
- CAD/BIM formats supported
- Whether a total station is needed