Advanced Construction Robotics
TyBOT
Gantry robot running on screed rails/edge forms that autonomously finds and ties rebar intersections on bridge decks and horizontal cast-in-place slabs
Price on request
At a glance
HybridPower
On saleStage
United StatesMaker based in
Specifications
| Work rate | 900 min / 1,200+ ties/h observed (>9,600 per 8-h shift) |
|---|---|
| Working width | Screed rail width 10-117 ft (3-36 m) |
| Row spacing | 7.6-30.5 cm |
| Speed | 0.2 m/s travel |
| Weight | Base unit 1,864 kg |
| Power | 7 kW 240 VAC |
| Engine | Fuel 3.6 L/h at full load |
| Compatibility | Bars #4x#4 to #8x#9; epoxy/black/galv/stainless/fibreglass |
| Other | 0-40 °C; setup <2 h; no BIM/pre-mapping |
What it does
Rebar tying
Where it works
Documents
About the maker
- Based in
- Allison Park, PA, United States
- Status
- Active
- Sold in
- United States
- Rental or as a service
- Yes
Facts from the maker’s own website (constructionrobots.com), last checked 2026-10-30.
More from Advanced Construction Robotics
Similar robots from other makers
Buyer’s guide: rebar tying and welding robots
How they work
Rebar robots ride on the mat and tie every crossing; welding robots run in fabrication shops on parts that used to be welded by hand.
What to check before buying
- Ties or weld metres per hour
- On site or in a shop
- Setup time per job