Advanced Construction Robotics
IronBOT
Gantry robot that lifts, carries, singulates and places transverse and longitudinal rebar bundles on decks
Price on request
At a glance
Specifications
| Work rate | Average 5,000 lb/h (~2,270 kg/h) placement |
|---|---|
| Working width | Project widths 27-117 ft |
| Compatibility | Bars 9-60 ft |
| Other | Onsite and working within 6-8 h |
What it does
Rebar placement
Where it works
About the maker
- Based in
- Allison Park, PA, United States
- Status
- Active
- Sold in
- United States
- Rental or as a service
- Yes
Facts from the maker’s own website (constructionrobots.com), last checked 2026-10-30.
More from Advanced Construction Robotics
Similar robots from other makers
BAUBOT MRS15
Tracked mobile robotic system with industrial arm for drilling, anchor setting, milling, pick&place and concrete…
MULE ML150
Higher-capacity MULE lift-assist arm for masonry, retaining walls, refractory, solar panels
$1,465 per month
MULE MZ100
Lift-assist arm that carries the weight of heavy blocks/panels so a mason or installer places them by hand
$1,465 per month
Gravis RACK
Retrofit autonomy kit making excavators and wheel loaders autonomous: terrain-aware digging, truck loading, 3D…
EksoZeroG
Zero-gravity articulated tool-support arm mounted on scissor lifts/aerial platforms or scaffold rails that…
SkyMul rebar tying robot
Autonomous robot that places and ties rebar using onboard sensors (originally drone-based rebar tying concept)
Buyer’s guide: rebar tying and welding robots
How they work
Rebar robots ride on the mat and tie every crossing; welding robots run in fabrication shops on parts that used to be welded by hand.
What to check before buying
- Ties or weld metres per hour
- On site or in a shop
- Setup time per job