NDT inspection drone
Drone that takes contact non-destructive measurements on structures.
Price on request
At a glance
Specifications
| Work rate | DFT: 100+ readings/hour; UT: 100+ sites/hour |
|---|---|
| Sensors | DeFelsko Positector 6000; DeFelsko UTG M, 5 MHz |
| Certification | SSPC-PA 2, ASTM D 7091 |
| Other | DFT: max altitude 100 m (300 ft); wind tolerance up to 12 knots (13 mph); UT: max altitude 100 m (330 ft); wind up to 12 knots (14 mph); output 3D structure map |
What it does
Where it works
About the maker
- Company
- Apellix
- Based in
- Jacksonville, FL, United States
- Status
- Active
- Sold in
- Not found on the maker's site
- Rental or as a service
- Not found
Facts from the maker’s own website (apellix.com), last checked 2026-11-02.
More from Apellix
Similar robots from other makers
PACO
Autonomous interior painting robot with airless spray and 3D-scan-based guidance for walls and ceilings
From €1.20 per m²
EG7
Autonomous interior finishing robot with 3D laser mapping: spray/roller painting, drywall finishing (mud)…
Canvas drywall finishing machine
Mobile lift + arm that scans walls and sprays/applies joint compound and sands drywall to Level 4/Level 5 finish
MalerRoboter 2.0
Lightweight mobile airless spray-painting robot that automatically coats interior walls and ceilings
Basement Concrete Trowelling Robot
Trowels fresh concrete slabs in basements.
Exterior Wall Spraying Robot
Sprays coatings on building exterior walls.
Buyer’s guide: painting and drywall robots
How they work
A mobile base with a lift and spray or sanding head scans the room and works surface by surface.
What to check before buying
- Square metres per hour
- Finish quality versus a painter
- Room height and access limits